Modular design, easy maintenance
Molded components and standardized profiles keep every section serviceable — frames, drives and wear parts are exchanged, not rebuilt.
Pallet handling · BF1
BF1 · Toothed Twin-Belt Conveying System (Centre Drive)
Centre-driven T5 belts for long, slim layouts
At a glance
- 600 ≤ L ≤ 6,000 mm, +5 mm
- 160 ≤ Bwt ≤ 640 mm, +80 mm
- 500 mm (260 mm as upper layer, single-layer) – 2,000 mm, can be specified
BF1 (centre drive) moves the motor to the middle of the frame, freeing both ends for machine integration and transfer points. Same T5 twin-belt behaviour: slip-free positioning, accumulation on the machine and 90°/180° synchronous turning configurations.
Specification
- Conveyor length
- 600 ≤ L ≤ 6,000 mm, +5 mm
- Belt width (Bwt)
- 160 ≤ Bwt ≤ 640 mm, +80 mm
- Conveyor height H
- 500 mm (260 mm as upper layer, single-layer) – 2,000 mm, can be specified
- Double-layer height 2H
- 260 – (H−230) mm, +1 mm
- Number of legs
- 2 – 6
- Max load capacity
- 60 kg
- Speed in full load
- Vmax = 20 m/min
- Driving model
- Centre direct drive
- Conveyor belt
- T5 synchronous belt
- Length carrying capacity
- ≤ 0.6 kg/cm
- Configural types
- DS: single layer used as upper layer · SC: double layer · DW: single layer without leg
Features & application
Gentle belt conveying
Belt surface carries small workpieces and fixtures without marks — the standard choice for assembly, test and packing stations.
High-strength aluminium profile
Standard slots on both side surfaces make it easy to assemble the line with other equipment or assemble other components (sensor, bracket, etc.).
Synchronous and accurate
Can be configured with timing belt synchronization machines (90°/180°) and multiple synchronous belt turning machines for precise routing.
Clean operating environment
Operating environment cleanliness Class 10,000 · ambient temperature -10 °C to +80 °C.
Options
- Configural types: DS / SC / DW
- Chain types: C1 slited chain · C2 nylon-wheel chain · C3 maintenance-free nickel plated
- SM shielded motor · AR chain cover (water resistant)
- SN special material requirement
- SR special requirement — quote on drawing
Typical applications
- Factory automation
- Automobile parts
- Electronics
- Home appliance assembly
Selection sheets
Engineering selection sheets with real dimensions, options and ordering codes.
Datasheets are provided in English.
Ordering code
Every module ships with a unique ordering code — the same grammar across all eight families.
SC / DS / DW | DS: single layer used as upper layer · SC: double layer · DW: single layer without leg |
|---|---|
M | Motor · max load capacity class |
V | Carrier conveying speed (m/min) |
Bwt | Belt (chain) width · conveyor length (mm) |
H / 2H | Upper-layer / lower-layer conveyor height (mm) |
N | Number of support legs |
OP / F1 | Motor position and direction (per layer) |
C1 | C1 slited chain · C2 nylon-wheel chain · C3 maintenance-free nickel plated |
SR | Special requirement |
Related modules
Pallet Conveyor SystemDouble-speed and accumulating chain conveyors that flow pallets and workpiece carriers through assembly, test and buffering zones.BF3Q · Triple Speed Light Load Conveying SystemTriple-speed accumulating chain conveyor for light pallets — up to 18 m and 1,500 kg per line.BF3Z · Triple Speed Moderate Load Conveying SystemTriple-speed accumulating chain for moderate loads — up to 20 m and 3,000 kg per line.
Tell us your load case
Attach a drawing or a short spec — our engineers reply within 72 hours with a layout proposal and budgetary price.
- 72 h engineering response
- GA drawing & BOM before production
- CE · ISO 9001 · COO