Modular design, easy maintenance
Molded components and standardized profiles keep every section serviceable — frames, drives and wear parts are exchanged, not rebuilt.
Pallet handling · BF2.5Q
BF2.5Q · 2.5-Speed Light Load Conveying System
Compact 2.5× pallet flow for assembly and test stations
At a glance
- 1,000 ≤ L ≤ 12,000 mm, +1 mm
- 240 ≤ Bwt ≤ 800 mm, +10 mm (std. 240/320/400/480/640/800; others custom)
- 500 mm (260 mm as upper layer, single-layer) – 2,000 mm, can be specified
BF2.5Q brings the same accumulate-and-work principle to narrower lines: widths from 240 mm, lengths to 12 m and a 600 kg load class. It is the usual choice for electronics and small-mechanism assembly cells where stations sit close together.
Specification
- Conveyor length
- 1,000 ≤ L ≤ 12,000 mm, +1 mm
- Belt width (Bwt)
- 240 ≤ Bwt ≤ 800 mm, +10 mm (std. 240/320/400/480/640/800; others custom)
- Conveyor height H
- 500 mm (260 mm as upper layer, single-layer) – 2,000 mm, can be specified
- Double-layer height 2H
- 260 – (H−230) mm, +1 mm
- Number of legs
- 2 – 12
- Max load capacity
- 600 kg
- Speed in full load
- Vmax = 20 m/min
- Driving model
- Direct drive
- Conveyor belt
- Accumulation chain
- Length carrying capacity
- ≤ 1.5 kg/cm
- Configural types
- DS: single layer used as upper layer · SC: double layer · DW: single layer without leg
Features & application
Accumulation on the line
Workpiece pallets can be temporarily stored on the conveyor, ideal for assembly and testing operations along the assembly line.
High-strength aluminium profile
Standard slots on both side surfaces make it easy to assemble the line with other equipment or assemble other components (sensor, bracket, etc.).
Flexible cycle control
Used in conjunction with lifting and traversing units and elevators to achieve flexible automated cycle control.
Clean operating environment
Operating environment cleanliness Class 10,000 · ambient temperature -10 °C to +80 °C.
Options
- Configural types: DS / SC / DW
- Chain types: C1 slited chain · C2 nylon-wheel chain · C3 maintenance-free nickel plated
- SM shielded motor · AR chain cover (water resistant)
- SN special material requirement
- SR special requirement — quote on drawing
Typical applications
- Factory automation
- Automobile parts
- Electronics
- Home appliance assembly
Selection sheets
Engineering selection sheets with real dimensions, options and ordering codes.
Datasheets are provided in English.
Ordering code
Every module ships with a unique ordering code — the same grammar across all eight families.
SC / DS / DW | DS: single layer used as upper layer · SC: double layer · DW: single layer without leg |
|---|---|
M | Motor · max load capacity class |
V | Carrier conveying speed (m/min) |
Bwt | Belt (chain) width · conveyor length (mm) |
H / 2H | Upper-layer / lower-layer conveyor height (mm) |
N | Number of support legs |
OP / F1 | Motor position and direction (per layer) |
C1 | C1 slited chain · C2 nylon-wheel chain · C3 maintenance-free nickel plated |
SR | Special requirement |
Related modules
Pallet Conveyor SystemDouble-speed and accumulating chain conveyors that flow pallets and workpiece carriers through assembly, test and buffering zones.BF3Q · Triple Speed Light Load Conveying SystemTriple-speed accumulating chain conveyor for light pallets — up to 18 m and 1,500 kg per line.BF3Z · Triple Speed Moderate Load Conveying SystemTriple-speed accumulating chain for moderate loads — up to 20 m and 3,000 kg per line.
Tell us your load case
Attach a drawing or a short spec — our engineers reply within 72 hours with a layout proposal and budgetary price.
- 72 h engineering response
- GA drawing & BOM before production
- CE · ISO 9001 · COO